This medium was extracted automatically and has not been curated by experts, yet.
* Modification: Humid
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
OXOID Legionella CYE-Agar base
(with Legionella BCYE supplement) |
1000 | ml | - | - | |
1 Dehydrated media preparations are available from media distributors. | |||||
2 We use OXOID Legionella CYE-Agar base with Legionella BCYE supplement. | |||||
3 For solubilization of the lyophilized pellet use standard liquid media. Although Legionellae do not grow in those media they are suitable for resuspension and transfer onto agar plates. | |||||
4 Note: Alternatively use CYE-ACES AGAR |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Solution A | 490 | ml | - | - | |
Solution B | 490 | ml | - | - | |
Solution C | 10 | ml | - | - | |
Solution D | 10 | ml | - | - | |
1 Add Cysteine-HCl, then ferric pyrophosphate solution to solution A. Adjust the complete medium to pH 6.9 ± 0.5 at 50°C with sterile 1.0 N KOH or HCl. The pH of the medium is critical. Finally, add solution B. Swirl medium in flask during dispensing to petri dishes or tubes in order to keep charcoal suspended. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Yeast extract
(Difco 0127) |
10 | g | 20.408 | - | |
ACES
(N-2-acetamido-2-aminoethane-sulfonic acid) |
10 | g | 20.408 | 112.01 | |
Activated charcoal
(Sigma C 5510) |
2 | g | 4.082 | - | |
Distilled water | 490 | ml | - | - | |
1 Dissolve ACES and bring to pH 6.9 by slowly adding 1 N KOH. Add the other components and dissolve by boiling. Autoclave at 121°C for 15 minutes. Cool to 50 - 55°C. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Agar | 15 | g | 30.612 | - | |
Distilled water | 490 | ml | - | - | |
1 Autoclave at 121°C and cool to 50 - 55°C. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
L-Cysteine HCl x H2O | 0.4 | g | 40 | 227.744 | |
Distilled water | 10.0 | ml | - | - | |
1 Prepare a fresh solution and filter-sterilize it. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Fe4(PO4)2 | 0.25 | g | 25 | 33.548 | |
Distilled water | 10.00 | ml | - | - | |
1 Prepare a fresh solution by heating to 50 - 55°C in a water-bath. Filter-sterilize solution separately. | |||||
2 Please note: Soluble ferric pyrophosphate must be kept dry and in the dark. Do not use if chemical looses its green colour and becomes brown or yellow. |
Last modified: | 20.12.21 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Complex medium |
Final pH: | n.d. |
Equipment needed: | Autoclave, Filter |
Edit in Medium builder |
J172 | SULFOLOBUS MEDIUM (B) | |
J219 | CYC AGAR (pH 8.0) | |
J336 | PE MEDIUM (pH 6.8) | |
J337 | PE MEDIUM (pH 7.2) | |
J350 | THERMOCOCCUS MEDIUM (pH 6.0) | |
J1132 | HALOBACTERIA MEDIUM (pH 8.0) | |
672 | HALF STRENGTH NUTRIENT BROTH OR AGAR | |
C71 | NSW | |
C99 | S/W | |
C58 | MW | |
C100 | S/W + AMP |
pH | 4 - 6 | 4 strains |
pH | 6 - 8 | 3 strains |
phyla | 1 | 115 strains |
oxygen | microaerophile | 86 strains |
oxygen | aerobe | 10 strains |
Show more |