This medium was extracted automatically and has not been curated by experts, yet.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaCl | 6.0 | g | 6 | 102.669 | |
K2HPO4 | 2.0 | g | 2 | 11.483 | |
NaHCO3 | 40.0 | g | 40 | 476.151 | |
KNO3 | 0.5 | g | 0.5 | 4.945 | |
Distilled water | 1000.0 | ml | - | - | |
1 Adjust the pH to 9.0 - 9.5 with 2M KOH. Dispense into closed vessels (i.e. a serum tube or bottle) with a liquid to air ratio of about 1:10. Flush the gas phase with nitrogen and add 2% oxygen. Sterilize at 120°C 20 min. | |||||
2 After sterilization add from sterile stock solutions: | |||||
Trace element solution | 1.0 | ml | - | - | |
MgCl2 x 6 H2O
(200.0 g/l) |
1.0 | ml | - | - | |
3 (a white colloid will form which will rapidly dissolve after mixing) | |||||
Sodium thiosulfate pentahydrate
(4 M - 992 g/l) |
5.0 | ml | 4.964 | 20 | |
4 Incubate statically until growth occurs, then shake at 100 rpm. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
EDTA | 5 | mg | 0.005 | 0.017 | |
FeSO4 x 7 H2O | 2 | mg | 0.002 | 0.007 | |
ZnSO4 x 7 H2O | 100 | mg | 0.1 | 0.348 | |
MnCl2 x 4 H2O | 30 | mg | 0.03 | 0.152 | |
CoCl2 x 6 H2O | 200 | mg | 0.2 | 1.54 | |
NiCl2 x 6 H2O | 20 | mg | 0.02 | 0.154 | |
Na2MoO4 x 2 H2O | 30 | mg | 0.03 | 0.124 | |
CuCl2 x 2 H2O | 10 | mg | 0.01 | 0.059 | |
H3BO3 | 300 | mg | 0.3 | 4.851 | |
Distilled water | 1000 | ml | - | - | |
1 Final pH should be 3, add HCl if needed. Sterilization - 120°C 20 min. |
Last modified: | 22.02.22 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Defined medium |
Final pH: | 9.0 - 9.5 |
Edit in Medium builder |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
NaHCO3 | 40 | 476.151 |
NaCl | 6 | 102.669 |
Sodium thiosulfate pentahydrate | 4.964 | 20 |
K2HPO4 | 2 | 11.483 |
KNO3 | 0.5 | 4.945 |
Show more |