This medium was extracted automatically and has not been curated by experts, yet.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Na2CO3 | 22 | g | 22 | 207.571 | |
NaHCO3 | 8 | g | 8 | 95.23 | |
NaCl | 5 | g | 5 | 85.558 | |
K2HPO4 | 1 | g | 1 | 5.741 | |
Distilled water | 1000 | ml | - | - | |
1 Sterilize at 120°C 20 min in a closed vessel (i.e. a serum tube or bottle) with a liquid to air ratio of about 1:10. pH after sterilization will about 10. | |||||
2 After sterilization add from sterile stock solutions: | |||||
Trace element solution | 2 | ml | - | - | |
MgCl2 x 6 H2O
(200.0 g/l) |
1 | ml | - | - | |
3 (a white colloid will form which will rapidly dissolve after mixing) | |||||
Sodium thiosulfate pentahydrate
(4 M - 992 g/l) |
10 | ml | 9.927 | 40 | |
KSCN
(2 M - 194 g/l) |
5 | ml | 0.972 | 10 | |
4 Incubate statically until growth occurs, then shake at 100 rpm. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
EDTA | 5 | mg | 0.005 | 0.017 | |
FeSO4 x 7 H2O | 2 | mg | 0.002 | 0.007 | |
ZnSO4 x 7 H2O | 100 | mg | 0.1 | 0.348 | |
MnCl2 x 4 H2O | 30 | mg | 0.03 | 0.152 | |
CoCl2 x 6 H2O | 200 | mg | 0.2 | 1.54 | |
NiCl2 x 6 H2O | 20 | mg | 0.02 | 0.154 | |
Na2MoO4 x 2 H2O | 30 | mg | 0.03 | 0.124 | |
CuCl2 x 2 H2O | 10 | mg | 0.01 | 0.059 | |
H3BO3 | 300 | mg | 0.3 | 4.851 | |
Distilled water | 1000 | ml | - | - | |
1 Final pH should be 3, add HCl if needed. Sterilization - 120°C 20 min. |
Last modified: | 22.02.22 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Defined medium |
Final pH: | 10.0 |
Edit in Medium builder |
All strains for this medium: | 1 |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
Na2CO3 | 22 | 207.571 |
Sodium thiosulfate pentahydrate | 9.927 | 40 |
NaHCO3 | 8 | 95.23 |
NaCl | 5 | 85.558 |
K2HPO4 | 1 | 5.741 |
Show more |