This medium was extracted automatically and has not been curated by experts, yet.
* Modification: To the sterile, anaerobic, mineral medium add 0.08 ml polysulphide/10 ml medium, casamino acids to a final concentration of 0.2%. The may be precipitation of material and the medium will turn pale yellow due to the addition of the polysulphide. The colour will disappear as the strain grows.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaCl | 27.70 | g | 13.85 | 236.995 | |
MgSO4 x 7 H2O | 7.00 | g | 3.5 | 14.2 | |
MgCl2 x 6 H2O | 5.50 | g | 2.75 | 13.527 | |
KCl | 0.65 | g | 0.325 | 4.359 | |
NaBr | 0.10 | g | 0.05 | 0.486 | |
NaHCO3 | 0.32 | g | 0.16 | 1.905 | |
K2HPO4 | 1.00 | g | 0.5 | 2.871 | |
CaCl2 x 2 H2O | 0.05 | mg | 2.5e-5 | 1.7e-4 | |
KI | 15.00 | mg | 0.008 | 0.029 | |
H3BO3 | 0.03 | g | 0.015 | 0.243 | |
Modified Wolin's mineral solution II | 20.00 | ml | - | - | |
Casamino acids* | 0.20 | % | - | - | |
Distilled water | 2000.00 | ml | - | - | |
1 Prepare the medium anaerobically under nitrogen. Do not adjust the pH. | |||||
2 Prepare separate anaerobic stock solutions of, Casamino acids(10%), Yeast extract (10%), and glycine (2M = 150 g/l). A 0.5M polysulphide solution is prepared by dissolving 12.0 g Na2S x 9 H2O in oxygen free water, followed by adding 1.6 g sulphur - the solution will be dark yellow. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 1.500 | g | 1.5 | 7.848 | |
MgSO4 x 7 H2O | 3.000 | g | 3 | 12.172 | |
MnSO4 x H2O | 0.500 | g | 0.5 | 2.958 | |
NaCl | 1.000 | g | 1 | 17.112 | |
FeSO4 x 7 H2O | 0.100 | g | 0.1 | 0.36 | |
CoSO4 x 7 H2O | 0.180 | g | 0.18 | 1.161 | |
CaCl2 x 2 H2O | 0.100 | g | 0.1 | 0.68 | |
ZnSO4 x 7 H2O | 0.180 | g | 0.18 | 0.626 | |
CuSO4 x 5 H2O | 0.010 | g | 0.01 | 0.04 | |
AlK(SO4)2 x 12 H2O | 0.020 | g | 0.02 | 0.042 | |
H3BO3 | 0.010 | g | 0.01 | 0.162 | |
Na2MoO4 x 2 H2O | 0.010 | g | 0.01 | 0.041 | |
NiCl2 x 6 H2O | 0.025 | g | 0.025 | 0.193 | |
Na2SeO3 x 5 H2O | 0.300 | mg | 3.0e-4 | 0.001 | |
Distilled water | 1000.000 | ml | - | - | |
1 First dissolve nitrilotriacetic acid and adjust pH to 6.5 with KOH, then add minerals. Adjust final to pH 7.0 with KOH. |
Last modified: | 15.02.22 |
Source: | DSMZ |
Taxonomic range: | Archaea |
Medium type: | Defined medium |
Final pH: | n.d. |
Equipment needed: | Anaerobic workbench |
Edit in Medium builder |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
MgCl2 x 6 H2O | 2.75 | 13.527 |
K2HPO4 | 0.5 | 2.871 |
KCl | 0.325 | 4.359 |
NaHCO3 | 0.16 | 1.905 |
NaBr | 0.05 | 0.486 |
Show more |