Official DSMZ medium: This medium was manually curated by experts from the DSMZ.
This strain uses the standard medium without modifications.
| Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
|---|---|---|---|---|---|
| KCl | 0.34 | g | 0.336 | 4.507 | |
| MgCl2 x 6 H2O | 4.00 | g | 3.953 | 19.442 | |
| MgSO4 x 7 H2O | 3.45 | g | 3.409 | 13.831 | |
| NH4Cl | 0.25 | g | 0.247 | 4.618 | |
| CaCl2 x 2 H2O | 0.14 | g | 0.138 | 0.941 | |
| K2HPO4 | 0.14 | g | 0.138 | 0.794 | |
| NaCl | 18.00 | g | 17.787 | 304.356 | |
|
Yeast extract
(OXOID) |
0.50 | g | 0.494 | - | |
| Na-L-lactate | 1.50 | g | 1.482 | - | |
|
Fe(NH4)2(SO4)2 x 7 H2O
(0.1% w/v) |
2.00 | ml | 0.002 | 0.005 | |
| Modified Wolin's mineral solution | 10.00 | ml | - | - | |
|
Sodium resazurin
(0.1% w/v) |
0.50 | ml | 4.9e-4 | 0.002 | |
| NaHCO3 | 3.00 | g | 2.964 | 35.288 | |
| Na2S x 9 H2O | 0.50 | g | 0.494 | 2.057 | |
| Distilled water | 1000.00 | ml | - | - | |
| 1 Dissolve ingredients except bicarbonate and sulfide, then sparge medium with 80% H2 and 20% CO2 gas mixture for 30 - 45 min to make it anoxic. Add bicarbonate and adjust pH to 6.9, then dispense medium under 80% H2 and 20% CO2 gas atmosphere into serum vials (e.g., 20 ml per 100 ml bottle), seal and autoclave. Before use reduce the medium with sodium sulfide from a sterile anoxic stock solution prepared under 100% N2 gas. | |||||
| 2 After inoculation, add 2 bar overpressure of sterile 80% H2 and 20% CO2 gas mixture. | |||||
| Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
|---|---|---|---|---|---|
| Nitrilotriacetic acid | 1.50 | g | 1.5 | 7.848 | |
| MgSO4 x 7 H2O | 3.00 | g | 3 | 12.172 | |
| MnSO4 x H2O | 0.50 | g | 0.5 | 2.958 | |
| NaCl | 1.00 | g | 1 | 17.112 | |
| FeSO4 x 7 H2O | 0.10 | g | 0.1 | 0.36 | |
| CoSO4 x 7 H2O | 0.18 | g | 0.18 | 1.161 | |
| CaCl2 x 2 H2O | 0.10 | g | 0.1 | 0.68 | |
| ZnSO4 x 7 H2O | 0.18 | g | 0.18 | 0.626 | |
| CuSO4 x 5 H2O | 0.01 | g | 0.01 | 0.04 | |
| AlK(SO4)2 x 12 H2O | 0.02 | g | 0.02 | 0.042 | |
| H3BO3 | 0.01 | g | 0.01 | 0.162 | |
| Na2MoO4 x 2 H2O | 0.01 | g | 0.01 | 0.041 | |
| NiCl2 x 6 H2O | 0.03 | g | 0.03 | 0.231 | |
| Na2SeO3 x 5 H2O | 0.30 | mg | 3.0e-4 | 0.001 | |
| Na2WO4 x 2 H2O | 0.40 | mg | 4.0e-4 | 0.001 | |
| Distilled water | 1000.00 | ml | - | - | |
| 1 First dissolve nitrilotriacetic acid and adjust pH to 6.5 with KOH, then add minerals. Adjust final to pH 7.0 with KOH. | |||||
| Last modified: | 17.10.22 |
| Source: | DSMZ |
| Taxonomic range: | Archaea |
| Medium type: | Complex medium |
| Final pH: | 6.9 |
| Equipment needed: | Autoclave, Gassing station, Serum bottle |
| Edit in Medium builder | |
Detailed instructions for the cultivation of anaerobes including important warnings can be found in the cultivation instructions .
| All strains for this medium: | 4 |
No modifications necessary for this strain.
| Compound | Conc. [g/L] | Conc. [mM] |
|---|---|---|
| MgCl2 x 6 H2O | 3.953 | 19.442 |
| NaHCO3 | 2.964 | 35.288 |
| Na-L-lactate | 1.482 | - |
| Na2S x 9 H2O | 0.494 | 2.057 |
| Yeast extract | 0.494 | - |
| Show more | ||