This medium was extracted automatically and has not been curated by experts, yet.
* Modification: Adjust pH of final medium to 6.0.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaNO3 | 1 | g | 1 | 11.765 | |
NaHCO3 | 1 | g | 1 | 11.904 | |
Na2S2O3 x 5 H2O | 1 | g | 1 | 4.029 | |
Sulfur
(powdered) |
10 | g | 10 | 311.818 | |
Synthetic seawater
(MJ) |
1000 | ml | - | - | |
1 Prepare the medium under an atmosphere of H2/CO2 (80:20) without adding NaNO3, Na2S2O3 x 5 H20 and NaHCO3 in serum bottles and seal the serum tubes with butyl rubber stoppers. Steam medium for 3 hours on each of 3 successive days. To the sterile medium add, from filter sterilised stock solutions, NaNO3, Na2S2O3 x 5 H20 and NaHCO3. | |||||
2 Increase the 80% H2 + 20% CO2 gas phase pressure to 0.3 MPa. | |||||
3 Adjust pH strain-specifically. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
NaCl | 25.00 | g | 25 | 427.789 |
K2HPO4 | 0.14 | g | 0.14 | 0.804 |
CaCl2 x 2 H2O | 0.70 | g | 0.7 | 4.761 |
NH4Cl | 0.25 | g | 0.25 | 4.674 |
MgSO4 x 7 H2O | 3.40 | g | 3.4 | 13.794 |
MgCl2 x 6 H2O | 4.20 | g | 4.2 | 20.659 |
KCl | 0.50 | g | 0.5 | 6.707 |
Trace mineral solution | 10.00 | ml | - | - |
Distilled water | 1000.00 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 1.500 | g | 1.5 | 7.848 | |
MgSO4 x 7 H2O | 3.000 | g | 3 | 12.172 | |
MnSO4 x n H2O | 0.500 | g | 0.5 | - | |
NaCl | 1.000 | g | 1 | 17.112 | |
FeSO4 x 7 H2O | 0.100 | g | 0.1 | 0.36 | |
CoSO4 x 7 H2O | 0.180 | g | 0.18 | 1.161 | |
CaCl2 x 2 H2O | 0.100 | g | 0.1 | 0.68 | |
ZnSO4 x 7 H2O | 0.180 | g | 0.18 | 0.626 | |
CuSO4 x 5 H2O | 0.010 | g | 0.01 | 0.04 | |
AlK(SO4)2 | 2.000 | mg | 0.002 | 0.008 | |
H3BO3 | 0.010 | g | 0.01 | 0.162 | |
Na2WO4 x 2 H2O | 0.100 | g | 0.1 | 0.303 | |
NiCl2 x 6 H2O | 0.025 | g | 0.025 | 0.193 | |
Distilled water | 1000.000 | ml | - | - | |
Na2MoO4 x 2 H2O | 0.010 | g | 0.01 | 0.041 | |
Na2SeO3 x 5 H2O | 0.050 | g | 0.05 | 0.19 | |
1 First dissolve nitrilotriacetic acid and adjust pH to 6.5 with KOH, then add minerals. Final pH 7.0 (with KOH). |
Last modified: | 05.06.24 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Defined medium |
Final pH: | * 6.0 |
Equipment needed: | Filter |
Edit in Medium builder |
Detailed instructions for the cultivation of anaerobes including important warnings can be found in the cultivation instructions .
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
Sulfur | 10 | 311.818 |
MgCl2 x 6 H2O | 4.2 | 20.659 |
NaHCO3 | 1 | 11.904 |
NaNO3 | 1 | 11.765 |
Na2S2O3 x 5 H2O | 1 | 4.029 |
Show more |